gep20234borito4/2023

  gep20234borito gep20234angimp gep20234angtart

•  4/2023 table of contents


Alireza Aghakhani, Dr. Ágnes Takács:
BIOMIMETIC DESIGN THINKING: INTEGRATING NATURE’S STRATEGIES INTO THE DESIGN PROCESS 5

Judit Albert, Dr. Ágnes Takács:
ADDITIVE MANUFACTURING WITH BIOMIMETIC APPROACH 9

Sándor Apáti, Dr. György Hegedűs:
CONCEPTUAL DESIGN OF JIG SAW TEST BENCH 13

Angadi Basettappa Vishalakshi, Dr. Péter Bencs:
SOLUTION OF JOULE THOMSON EFFECT FOR GAS PRES-SURE REGULATOR STATIONS 17

Kolkar Nanjappa Sneha, Nóra Nagy, Dr. Péter Bencs:
HYDROGEN MIXING WITH NATURAL GAS - RISK ASSESSMENT 21

István Besenyei, Dr. Zoltán Bihari:
THE LOAD-BEARING CAPACITY OF THE CENTRAL HOLE OF AN ALUMINIUM PROFILE FOR MECHANICAL ENGINEERING 25

Dr. Zoltán Bihari:
PAST, PRESENT AND FUTURE OF TEACHING TECHNICAL COMMUNICATION 29

Eszter Borsodi, Dr. Ágnes Takács:
DEVELOPMENT OF A DESIGN METHOD FOR CIRCULAR MANUFACTURING 33

Péter Csvila, Dr. Tibor Czigány:
MANUFACTURING OF CARBON-BASED CONDUCTIVE STRUCTURAL COMPOSITES AND ANALYSING THEIR PROPERTIES 39

Attila Bús, Péter Demeter:
DEVELOPMENT OF CUSTOM DIAGNOSTIC ADAPTERS FOR DIFFERENT AUTOMOTIVE APPLICATIONS THROUGH THE PRINCIPLES OF THE PRODUCT DEVELOPMENT METHOD 45

Tatiane Domokos, Dr. Szabolcs Szávai, Dr. Attila Baksa:
MODELLING OF TENSILE TEST FOR SIMPLE FLAT SPECIMEN 49

Sándor Döbrentei, Dr. Károly Váradi:
ANALYTICAL VALIDATION OF MOVING HEAT SOURCE DEFINED IN FINITE ELEMENT ENVIRONMENT 53

Dr. Csaba Dömötör:
EXPERIENCE OF COMPONENT RECONSTRUCTION SOLUTIONS WITH 3D PRINTING 57

Zsuzsa Drágár, Dr. László Kamondi:
DETERMINING THE AXIAL SIZE OF THE CONTACT ZONE IN THE MESHING OF CYLINDRICAL EXTERNAL HELICAL GEARS 61

Prof. Dr. István Ecsedi, Dr. Attila Baksa, Habbachi Marwen:
BENDING OF CURVED BEAM WITH RECTANGULAR CROSS SECTION MADE OF DOUBLE MODULUS FUNCTIONALLY GRADIENT MATERIAL 65

Dr. Péter Ficzere, Noémi László:
ANALYSIS OF SEM IMAGES USED TO INVESTIGATE THE EFFECT OF IRONING PARAMETERS BY CAD SOFTWARE 69

Sahm alden Abd al al, Mariann Fodorné Cserépi, Dr. Marcell Gáspár, Dr. Ákos Meilinger:
Resistance spot welding and dissimilar joining of automotive high-strength steels and aluminium alloys 73

Dr. Viktor Gotthard:
BRAND NEW DIRECTIONS OF DESIGN FOR X 77

Dr. György Hegedűs:
MACHINING WITH LONG EXTENDED TOOLS 81

Hussein Alzyod, Dr. Péter Ficzere, Dr. Lajos Borbás:
THERMAL ANALYSIS OF FDM PROCESS PARAMETERS AND THEIR EFFECTS ON RESIDUAL STRESS 85

Dr. Károly Jálics:
FAILURE ANALYSIS OF FLYWHEEL RETAINING BOLTS 89

Dr. Andrea Keszi- Szeremlei, Dr. Ferenc Nádasdi:
DEVELOPMENT OF INDUSTRIAL TECHNOLOGIES USING THE VALUE METHODOLOGY 93

Noémi László, Dr. Péter Ficzere:
POSSIBILITIES OF COLD PLASMA SURFACE MODIFICATION FOR VEHICLE INDUSTRY APPLICATIONS MANUFACTURED WITH ADDITIVE TECHNOLOGIES 97

Balázs Kriston J., Dr. Károly Jálics:
POSSIBILITY OF INVESTIGATING VEHICLE FAILURES WITH THE TIME DIFFERENCE OF ARRIVAL (TDOA) METHOD 102

Imre Marada, Dr. János Bihari:
COMPARISON OF THE EQUIPMENTS FOR THE MEASUREMENT OF THE RECIRCULATION TORQUE IN THE CASE OF SMALL PLASTIC GEARS 106

Géza Németh:
TOWARDS A LOW-NOISE YET EFFICIENT GARDENING 110

Sándor Fenyvesi, Prof. Dr. Ferenc Orbán:
MECHANICAL ENERGY STORAGE TECHNOLOGIES 114

Dr. Ferenc János Szabó:
GRAPHO-ANALYTIC OPTIMIZATION OF PARALLEL KEY SPLINED SHAFT 118

Dr. Sándor Szirbik, Dr. Zoltán Virág:
VIBRATION ANALYSIS OF A BRIDGE FRAME SUBJECTED TO LOADS USING FINITE ELEMENT ANALYSIS 122

Ferenc Borbás:
SUSTAINABLE PRODUCT AND SERVICE DEVELOPMENT FOR SOLAR PANEL COVERINGS 126

PDF-ikonview the complete magazine, download pdf 

 

gtelogo1
pro-inno-logo
NKA logo 2013

Search in the website

Site Last Modified

  • Last Modified: Friday 10 May 2024, 10:40:41.